Demo of xps_graphics_engine_v2_00_a on SP605 board: This demo consists of: 1. A bitfile for the SP605 board containing among other cores, the xps_graphics_engine_v2_00_a and the xps_lcd_ctrl_v2_00_b core. 2. SDK project for version 14.1, consisting of the Board Support package, Hardware export files and the demos program (video_demo). The demo program and images must be downloaded to the target using XMD. Use the following procedure to run the demo: 1. Start SDK and choose a workspace directory 2. Choose file/import/general and import archive file - you will end up with three projects : SP605_hw_platform, SP605_standalone_bsp and video_demo 3. Power up the SP605 board with serial port connected to a terminal at 115200 bps, monitor connected to the video port and the JTAG port plugged in. 4. Choose Xilinx Tools/Program FPGA and let SDK update the bitfile and download it to the target. 5. Open a XMD window 6. In XMD type: connect mb mdm 7. In XMD type: cd /SW/video_demo/ 8. In XMD type: dow video_demo.elf 9. In XMD type: dow -data ../images/sp605_images.bin 0x50300000 (the download will take a minute or two) 10. In XMD type: run 11. On the serial port a menu should appear. Choose g to run the demo The output images size is 800x600 @ 60 Hz using a 40 MHz pixel clock. The pixels are each 16 bits and are formatted as: RED: 15:11 GREEN:10:5 BLUE: 4:0 Other resolutions are possible, only limited by the available memory bandwidth and the logic operating frequency. We look forward to be adding value to your design(s), please don't hessitate to contact us with any questions you may have. Finn S. Nielsen General Manager E-mail: fn@morphologic.dk Phone: +45 44914341 Morphologic ApS Lindeengen 151 2740 Skovlunde Denmark